Silicone tubes can withstand a wide temperature range. Chemical or physical properties are less affected. However, due to various factors, a series of problems will occur. For this reason, attention should be paid to the use.

Silicone tube use points:
First of all, the water tank gasket manufacturer introduced that the silicone tube has a good tortuous function in use, the bending radius is small, and it does not pleat in the case of tortuosity. Therefore, in order to prevent the temperature from being too high, do not overload for a long time, pay attention to the radiator fins not to be contaminated by oil, and the dust-proof soil adhesion affects the heat dissipation.

Secondly, look at the brightness of the cross section of the surface of the silicone tube. The high brightness is the top grade, and the gel elasticity of the nail is good. In the movement or discontinuity, the hose can not be excessively tortuous, nor can it be tortuous at the root. It must be at least 1.5 times the diameter of its diameter. In addition, the high-pressure hose should not be pulled too tightly when it moves to the pole position.

Finally, the manufacturer of the water tank gasket should try to prevent the deformation of the silicone tube as much as possible. The hose should be kept away from the heat radiation member as much as possible. If necessary, a heat insulation board can be added to prevent external damage of the hose. Such as the use of long-term conflicts on the surface of the same components; the viscosity of the oil drops, simply causing leakage. When connecting, the silicone tube is placed over the hose barbed fitting and secured with the two straps from the opposite direction to secure the hose. Common molding is feasible and sometimes used in the field of medical devices.