The real rubber product is just the opposite of the fake silicone. Its toughness and elasticity are very good. It won't be deformed by external force, and the hand feels very smooth. But if you want to really distinguish the true and false rubber products, you need to do the following aspects. Detailed analysis.

Rubber product identification:
1. Silicone products custom manufacturers introduce tensile strength is one of the many physical properties of vulcanized rubber, but also into tensile strength tensile strength. It refers to the tensile stress per unit area of the test piece subjected to stretching to break, in MPa.

This indicator is generally included in the vulcanizate measurement program. The reason for this is that the tensile strength is easier to measure, and among many properties, it is most sensitive to changes in various processing conditions. Among rubber products, especially industrial rubber products, tensile strength is often used as the main standard of product quality.

2. Identification of rubber products: Elongation means that when the test piece is stretched, elongation deformation will occur in the direction of stretching. The percentage of the length of the elongation and the original length of the test piece is called elongation. The elongation at break of the test piece is called the elongation at break, which is called the elongation. Because the elongation of rubber-bonded vulcanizate is as high as 600%-1200%, the elongation of natural rubber carbon black with vulcanizate is 100%---600%, and the elongation of butadiene rubber vulcanizate is up to 500%.

3. The so-called deformation refers to the deformation of the rubber material under the action of stress. After the stress is released for a certain period of time, it cannot be restored to the original shape and remains. The deformation after the test piece is broken, called the tear deformation, is often called deformation.

Silicone products custom manufacturers introduce the fact that the simple identification method of rubber products is the combustion test method. Use scissors to cut a small strip on the edge of the product, ignite it by fire, observe the color of the smoke produced while it is burning and not extinguished, and then observe the presence or absence of ash after it is extinguished. If there is ash, observe it. Color and state, if it is white smoke and white ash, it is a rubber product.