The quality problem of the silicone button is broken, and there will be corresponding situations in daily applications. There are many reasons for this. This requires us to pay attention. At the same time, learning some remedies can also reduce certain losses, no need to trouble other. People, or buy again.
Silicone button rupture remedy:
1, the water tank gasket manufacturers introduce the method of rapid bonding, the choice of silica gel thermal vulcanization bonding: first, clean the surface of the silicone products oily dust, etc., secondly, evenly glue the glue on the interface of the silicone product to be bonded, and finally put it in the mold high temperature Pressurize and heat.
2, the method of slow bonding using slow-drying glue: First, clean the surface of the silicone products oily dust, etc., second, in the two silicone products to be bonded to the interface evenly glue, the two fixed or pressed to place 8~12 It can be an hour.
3, the method of rapid bonding using instant glue with treatment agent: first, cleaning the surface of the silicone products oily dust, etc., second, in the two silicone products to be bonded to the interface to evenly apply the treatment agent, placed for 5 minutes; finally, in the silicone products Glue the glue evenly on one side and fit the two together.
Water tank gasket manufacturer introduction In general, when we make silicone buttons with more than 2 different colors, it is common to put various colors of silicone material on different parts of the mold and then form them. Generally, the color of this product is suitable. Not many, and the production of some complex silicone products.