This tube is a new item with good resistance to performance and stability, and can withstand multiple rigor and disinfection conditions, often used in the medical field, and there are many types to choose from, but because of itself Some of the features that require special attention when used.

Silicone tube use points:
1. Silicone products custom factory introduction Silicone tube has good tortuous function in use, the bending radius is small, and it does not pleat in the case of tortuosity. Therefore, in order to prevent the temperature from being too high, do not overload for a long time, pay attention to the radiator heat sink not to be contaminated by oil, to prevent the heat dissipation by the adhesion of dustproof soil, and to insist on the amount of oil to facilitate the heat dissipation of the oil. Pressure test, the national standard requires the test pressure to be twice the working pressure, and the explosion pressure is usually 3-4 times the working pressure.

2, the use of silicone tube points: observe the brightness of the cross section of the silicone tube surface, the high brightness is the top grade, and the nail elasticity is better. In the movement or discontinuity, the hose can not be excessively tortuous, nor can it be tortuous at the root. It must be at least 1.5 times the diameter of its diameter. In addition, the high-pressure hose should not be pulled too tightly when it moves to the pole position.

3. Avoid contact with strong acid and alkali when using. Because strong acid and alkali will chemically react with food grade silica gel. Thereby destroying food grade silica gel. The silicone tube should be as far away as possible from the heat radiation member, and if necessary, a heat insulation plate can be added to prevent external damage of the hose. If the surface of the same component is used for a long time, the viscosity of the oil drops, which leads to leakage, power loss, and the strength of the lubricating film decreases, which accelerates mechanical wear, carbide formation and siltation, and oil oxidation accelerates deterioration of oil quality and oil seal. High pressure hose premature aging.

Silicone products custom factory introduction It is important that the medical silicone tube is used under the rated working pressure and ambient temperature. As the temperature rises, the working pressure should be reduced accordingly. If it exceeds the limit, it may rupture. In addition, if it is transported more than 220 degrees in normal time. Fluid or fluid with a highly corrosive chemical composition can result in reduced service life and tube rupture.