For the phenomenon that the surface of silicone rubber products is easy to adhere to dust, it is usually sprayed with hand-feeling oil, which can absorb oily substances, increase the smoothness of the surface, and isolate the external contact. In addition to this method, there are more techniques that can be used. 

Method for removing dust from silicone rubber surface:
1. You can soak in warm water with a clean rag, wring the water of the rag, then wipe the surface of the silicone product such as the water tank gasket with a rag, and repeatedly wipe the silicone product with a rag.

2. The surface pattern of the silicone product is relatively deep. It is not easy to clean with a rag. You can use a soft brush to wash some warm water. If there is oil stain, it can't be washed with water. Use a brush to wash the detergent.

3, remove the surface of the silicone rubber dust method: silicone products have strong stains such as glue, use a cotton swab to apply a little bit of oil on the stain evenly, then use a soft brush to wash the detergent, and finally use Rinse with warm water.

4. The cleaned silicone products should be placed in a cool place to dry, not to be exposed to the sun.

5. After the silicone products are produced, they will be stored in a box and wrapped in a clean cloth. If the product needs to be stored for a long time, it needs to be packaged with a film bag to prevent the surface of the silicone product from adhering to the dust and ensure the appearance of the product. quality.

Silicone rubber products are closely related to people's lives. Water tank seals, remote controls, keyboards, pos machines, scanners, mobile phones, electronic dictionaries, mobile phone sets, bottle mouths, etc. are all related to silicone rubber. Silicone rubber has been ubiquitously integrated into our lives. Life is beautiful because of silicone rubber, and life is rich and wonderful due to silicone rubber.