Silicone products of the production or more complex, of which the release is a very crucial step, if the operation is bad, will affect the final result, so we need to know how to solve, so as to deal with all sorts of things, in accordance with user requirements.

Silica gel products mold release:
1, the mold surface treatment. Custom silicone products manufacturer to introduce silicone products molding tooling in the hydraulic molding machine in front of processing, especially had just put the electricity new mould must first sandblasting processing, cavities for choose different mould sand washing, just finish spray sand mould must be heated to a temperature enough after forming, nesting and molding before must good spraying mold release agent, it is worth noting that the electroplating mold must not sandblasting, including spray resin sand.

2, spray mold release agent processing. Molding silicone products, silicone products don't adhere to any side mould surface spray mold release agents, but sometimes is not easy to stick. Solution: use a spray bottle or other with clean water, hope the product spray adhesive which is where, after the injection and molding, products will obediently stuck to want to put them.

3, the adjustment of the die temperature. Products like to half of the mould temperature low viscosity, when the upper die temperature 175 ℃, the mould temperature 165 ℃, the product when lift mode is often stuck in mold.

Custom silicone products manufacturer is introduced for the silicone products factory, actually the silicone mold is quite important, therefore, the fault of the silicone mold repair is necessary. Before repairing mold, shall, according to the actual situation of the silicone mold phenomenon of bad, carries on the detailed analysis and research, find out the cause of mold defects after remedial method is put forward.